#Default folder x 5.3 review generator

#Default folder x 5.3 review generator

They are used by the Oscilloscope, Arbitrary Waveform Generators, Logic Analyzer, and Digital Pattern Generator instruments. The Electronics Explorer board has four trigger input pins. The trigger event is the rising edge of the trigger signal. a/ap will be replaced by either вЂњamвЂќ or вЂњpmвЂќ. A/AP will be replaced by either вЂњAMвЂќ or вЂњPMвЂќ. The milliseconds with leading zeroes (000 to 999). The milliseconds without leading zeroes (0 to 999). The second with a leading zero (00 to 59).

The second without a leading zero (0 to 59). The minute with a leading zero (00 to 59). The minute without a leading zero (0 to 59). The hour with a leading zero (00 to 23, even with AM/PM display). The hour without a leading zero (0 to 23, even with AM/PM display). The hour with a leading zero (00 to 23 or 01 to 12 if AM/PM display). The hour without a leading zero (0 to 23 or 1 to 12 if AM/PM display). Uses the system locale to localize the name. The long localized month name (e.g., 'January' to 'December'). The abbreviated localized month name (e.g., 'Jan' to 'Dec'). The month as a number with a leading zero (01-12). The month as a number without a leading zero (1-12). The long localized day name (e.g., 'Monday' to 'Sunday'). The abbreviated localized day name (e.g., 'Mon' to 'Sun'). The day as a number with a leading zero (01 to 31). The day as a number without a leading zero (1 to 31). For horizontal cursors the position is expressed in horizontal axis unit and vertical value is shown in intersection with each waveform. The cursor's drop down menu and the table as well, contains adjustment controls for the reference cursor selection, position, delta value relative to reference cursor and remove button. The Cursor view enabled in the instrument's View menu shows the position and measurements in table. The cursors can be selected with the channel number shortcut, pressing 1, 2.

Mouse button middle click removes the cursor. The cursors position can be modified by mouse drag, keyboard arrow keys or adjustment control in cursor's drop-down menu. The first cursors is by default added as normal cursor, the following ones as delta of this, showing the difference. The Y cursors in Scope main time plot can be added by Y button in top right corner. These can be added by pressing the X button in the plot bottom left corner. Using delta cursors, you can make measurements that deal with power change with frequency or time. The Cursors are used to measure the amplitude, to indicate certain places on the waveform, such as band or channel limits. Click on the plot locks or unlocks the hottrack to current position. This can be enabled and disabled with the toggle button in the top-right corner or mouse double click on the plot. This shows a vertical cursor and the values at intersections with waveforms. The HotTrack lets you take measurements by moving the mouse cursor. Plot Width: sets the thickness of the waveform, expressed as points. The New button creates a new workspace, which can be used to close the instruments that are currently open while also forgetting the last instrument configurations. When an instrument is closed, its state is saved and loaded when reopened. The Workspace's Open, Save, and Save as buttons allow the user to load or save WaveForms workspaces. The Settings menu contains the Options, the Device Manager, and Trigger PC. The instruments can also be opened from the Welcome tab вЂњ+вЂќ (add) menu.ДЄn instrument's button is disabled when the selected device or configuration does not support it.

The WaveForm's main window Welcome tab (shown above) has buttons for each instrument: Scope (Oscilloscope), Wavegen (Arbitrary Waveform Generator), Supplies (Supplies and Reference Voltages), Meters (Voltmeters), Analyzer (Logic Analyzer), Patterns (Digital Pattern Generator), Static I/O (Static Digital Input/Output), Bode (Network Analyzer), Spectrum Analyzer and Script instruments.

USB Scopes, Analyzers and Signal Generators.